Dulux Concrete & Paving Bare Concrete Primer 1L

Concrete & Paving Bare Concrete Primer is the second stage in preparing bare concrete surfaces for the finishing coat. It is formulated to reinforce the surface for optimal adhesion of subsequent coats of paint. Bare Concrete Primer reinforces concrete by creating a sound surface for applying any Concrete & Paving Stage 3: Finish.

• Application tools: 15mm nap roller, roller frame with an extension pole, roller tray, 50 to 65mm brush
• Touch Dry: 30 mins Fully Dry: 2 hours
• Water clean-up
• Step 1 – Prepare the surface using Dulux Concrete and Paving Bare Concrete Etch and Clean
• Step 2 – Using the roller and brush for any edges and hard-to-reach places, apply one coat of Dulux Concrete Bare Concrete Primer evenly across the surface and allow to dry
• Step 3 – Apply a 2nd coat and allow to dry
• You are now ready to apply any Dulux Concrete & Paving Stage 3 – finishing coat.

Surfaces:

• Bare concrete new – pressure washed
• Bare concrete aged – pressure washed
• Bare concrete new – etched
• Bare concrete aged – etched
• Concrete pavers – uncoated, pressure washed
• Hardie Deck